posted on November 30, 2018
Turbine Technologies' staff returned from California this week following the delivery of a brand new, turnkey educational lab product to...
Continue Reading...
posted on April 03, 2018
Todd Gaines, Director of Sales at Turbine Technologies recently stated, “From the first sale of our educational gas turbine lab system in 2008, ...
posted on April 26, 2017
On Wednesday, April 19th, Turbine Technologies’ new mobile engineering and technology training center arrived at the University of Wisconsin, Gr...
posted on April 04, 2017
TTL’s new Mobile Engineering and Technology Training Center is now on tour! Todd Gaines, Director of Sales sta...
posted on November 20, 2015
It's difficult to escape the influence of automated systems. Nearly every mechanical and electrical device we encounter on a daily basis has some elem...
posted on June 18, 2014
Turbine Technologies, Ltd. has recently announced the addition of a new software piece that will enhance the educational experience offered by our ful...
posted on June 11, 2014
Complimentary Live Webcast ...
posted on April 18, 2014
Lowering Cost & Reducing Production Time, ProJet 3D Printing Lets Turbine Technologies Soar "If we used a traditional...
posted on April 07, 2014
As Dr. Paul Daniell was looking over the new Pump Lab, he turned to the three students in the room and asked, “What do you t...
posted on September 13, 2013
TTL announces new curriculum offerings to enhance the educational value of its laboratory products. Coursework for both the RankineCyc...
posted on August 27, 2012
Turbine Technologies, Ltd. recently visited Chippewa Valley Technical College (CVTC) to commission its first training device specifically developed to...
posted on July 23, 2012
Today we're welcoming the University of Shangahi for Science and Technology into our operator family. Professor Zhi Jun Zhao has taken delivery of our...
posted on July 02, 2012
Wisconsin’s 75th District Representative, Roger Rivard, recently took time out of his busy schedule to visit Turbine Technologies...
posted on June 15, 2012
With the introduction of its’ latest renewable energy laboratory product, WindLab™, Turbine Technologies, Ltd. (TTL) announces the launch ...
posted on April 25, 2012
With PumpLab, students learn the characteristics of centrifugal pumping, including the phenomenon of cavitation and the development of pump performance curves.
posted on April 24, 2012
Congrats to our Vice President, Perry Kuznar! Perry was just elected Vice Chair of the University of Wisconsin-Platteville’s Renewable Energy Ad...
posted on September 13, 2011
TTL released a story through various media outlets which focused on its’ MiniLab™ Gas Turbine Power System being utilized for Bio-Fuels Research.
posted on September 01, 2011
The full TTL product line is on display in one convenient place with the introduction of the Fall 2011/Spring 2012 Product Catalog.
posted on July 11, 2011
While developing the TurboGen™ Gas Turbine Electrical Generation System, Turbine Technologies, Ltd. determined their most ambitious educational lab system design to date should feature the latest onboard data acquisition and virtual instrument panel systems.
posted on October 07, 2010
The full TTL product line is on display in one convenient place with the introduction of the Fall 2010/Spring 2011 Product Catalog.
posted on June 09, 2009
Sometimes, it pays to know your neighbors. Sun Power Bio-Diesel of Cumberland, WI is a producer of cold-flow canola-based bio-diesel fuel.
posted on March 31, 2009
Turbine Technologies, Ltd. has announced the addition of Programmable Process Control capabilities to their PumpLab™ Centrifugal Flow Educational System.
posted on November 12, 2008
Pratt & Whitney recently awarded Turbine Technologies Ltd. (TTL) a contract to determine the scalability of data acquired from small gas turbine engine sensors. Financial terms were not disclosed
posted on January 03, 2008
Turbine Technologies recently completed the purchase of another new round of engineering software. ANSYS CFX (BladeModeler and DesignModeler) allow rapid definition of axial and radial flow blade rows and is part of a more complex suite of numerical based turbomachinery-specific analysis tools.
posted on September 06, 2007
After a year of proposals and negotiations, Turbine Technologies, LTD has been awarded a contract with the United States Army Aviation and Missile Command for $1.18 million
posted on August 31, 2007
Turbine Technologies, LTD has just finished installation, training and initial operation of a new computer-controlled, two-axis abrasivejet system for...
posted on July 27, 2007
Company Quadruples Available Office, Production and Testing Space To better position itself for future growth, Turbine Technologies, LTD announced ...
posted on June 23, 2007
Thomas M. Korb, Ph.D, PE, has joined the engineering department of Turbine Technologies, LTD as an Aerothermal Design Engineer. Dr. Korb's primary res...
posted on May 02, 2007
Interest in Experimental Aviation Leads to New Student Lab Product As a lifelong aviation enthusiast and past president of an Experimental Aircraft A...
posted on April 09, 2007
Turbine Technologies, LTD today announced the release of its first public PT-50 Engine Development Update in almost two years. The company had been un...
posted on February 01, 2006
Engine development and manufacturing relies heavily on the use of superalloy materials in temperature critical components such as turbine blades and a...
posted on June 01, 2005
Paper to be Presented at Upcoming 2005 ASEE Annual Conference and Exposition The father-son team of Philip and Andrew Gerhart are nearing completio...
posted on May 11, 2005
System Automates, Monitors MiniLab™ Gas Turbine Power System To further enhance MiniLab™ Gas Turbine Power System operation, Turbine Tech...
posted on March 24, 2005
Titanium Utilized for New Centrifugal Compressor Design Turbine Technologies this week completed its first centrifugal compressor assembly machined...
posted on January 27, 2005
Future Aviators, Engineers Learn with Miniature Turbojet On September 18, 2003, Hurricane Isabel, a level five hurricane, made landfall on the Nort...
posted on January 18, 2005
The tiny island nation of Singapore recently took delivery of its second MiniLab Gas Turbine Power System. Temasek Engineering School, a division of T...
posted on December 29, 2004
Conceptual Geometry to Finished Hardware in a Matter of Hours To expand its capabilities and further facilitate rapid product development, Turbine ...
posted on December 15, 2004
Ceramic Laser Machining, Real-Time Sensor Applications Examined to Further Gas Turbine Engine Performance Exploring collaborative research and prac...
posted on October 29, 2004
Turbine Technologies hosted United States Congressman David Obey, Wisconsin Senator Bob Jauch and Wisconsin Representative Mary Hubler and thanked the...
posted on May 25, 2004
Working Professionals Seeking Bachelor's Degree Learn on Miniature Power plant The University of Wisconsin - Fox Valley and the University of Wiscons...
posted on April 16, 2004
Universite de Liege Professor Modifies Small Turbojet for Research Olivier Leonard of the Universite de Liege in Belgium completed a visi...